Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: LG Refrigerator ice/water dispenser stuck "on"  (Read 5246 times)

Offline kmueller59

  • VIP Member
  • Member Since: Mar 2012
  • Posts: 1
LG Refrigerator ice/water dispenser stuck "on"
« on: March 01, 2012, 11:54:09 AM »

The ice maker/water dispenser on my LG refrigerator model LRSC21934SB got stuck in the "on" position, I had to shut off the water in order to disconnect it. Any ideas??

Offline wildimaginations

  • Technician
  • Member Since: Jul 2011
  • Posts: 714
  • Country: us
Re: LG Refrigerator ice/water dispenser stuck "on"
« Reply #1 on: March 05, 2012, 07:04:32 AM »
This is a pesky problem.  You will need to disassemble the display assembly and get into the dispenser switch area in the funnel frame.  Look for where the white lever makes contact to the door frame and shave off the plastic frame a little to clear the white lever.  That's the best way I can describe it.  It's a guessing game where it might be. 

Hope this helps.
Appliance Service Technician
Authorized servicer on LG appliances.
About 45 mins east of San Francisco


Kenmore refrigerator - how remove ice/water dispenser front panel

Started by Marvster

Replies: 1
Views: 36289
Last post August 11, 2007, 08:06:07 PM
by AJ
Maytag refrigerator Ice & water dispenser HELP

Started by nash

Replies: 3
Views: 7249
Last post January 26, 2008, 03:39:27 PM
by nash
Kitchenaid Refrigerator Leaking Water Dispenser.

Started by TechnicianBrian

Replies: 1
Views: 25492
Last post February 01, 2011, 07:00:04 AM
by jumptrout51
R-86 Whirlpool "F" Model Bottom Mount Refrigerator Service Manual

Started by AJ

Replies: 0
Views: 3780
Last post August 20, 2009, 01:22:18 PM
by AJ
Kenmore / LG refrigerator french door "latch" repair 795.77304600

Started by eben

Replies: 2
Views: 11866
Last post March 23, 2011, 06:27:10 PM
by JWWebster
Refrigerator Water Dispenser

Started by marty c

Replies: 2
Views: 4401
Last post January 24, 2010, 01:10:15 PM
by marty c