Thanks for the instructions. I read them last night and of course the instructions don't exactly line up with my dryer. The wiring instructions (gas dryer) list the following five wires:
Gray, Red, Blue, Black, Yellow
My dryer has a sixth wire. There is a white wire that goes into the same terminal as the blue wire. Attached is the wiring diagram from my dryer.
So, I have 2 questions
1) What should be done with the white wire? According to the wiring diagram it goes to the timer motor.
2) According to the instructions, the blue wire is only being used for a terminal. I am supposed to cut the blue wire and connect it to the red wire and plug both of these wires to the motor. What should I do with the loose blue wire? According to the wiring diagram, it goes to the door switch.
This job would be so much easier if I had the original motor part, instead of this replacement part.