I Found the culprit of the Slow, really slow spin on the Maytag Stackable Washer. LSE7804ACE !! I Replaced the Upper and Lower Tub Seal Kit - The culprit was the BRAND NEW silver sleeve that installs over the transmission shaft and slips between the transmission and the tub seal, this was binding on the NEW Lower Seal. When the tub was installed and buttoned up the basket was binding on this sleeve and if you looked up from the bottom of the tub (from transmission up to the tub) the Lower Tub Seal was actually spinning with the transmission in the spin mode. I Took the Basket and Tub back out and replaced the BRAND New Silver Sleeve with the old sleeve and re-installed basket and tub and buttoned everything back up. BINGO !!! Spin speed went from 50 rpm's up to 589 RPM's. Working perfectly now !!! No Smell of Rubber Burning anymore !!!
Moral of this story......make sure the Brand New Tub Seal slips into the BRAND NEW TUB SEAL SILVER SLEEVE AND ROTATES PERFECTLY WITHOUT BINDING. You would of thought being BRAND NEW THE TOLERANCES WOULD BE PERFECTLY ROUND, THIS WAS NOT THE CASE......... Here is a picture of the out of round BRAND NEW SILVER TUB SLEEVE ..... (The Culprit)