Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kitchen Aid Pro Line Front Loading Gas and Electric Dryer Fault Codes  (Read 3777 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10926
  • Country: us
    • ApplianceJunk.com - Appliance Repair

Kitchen Aid Pro Line Front Loading Gas and Electric Dryer Fault Codes (Models KHEV01RSS and KHGV01RSS)
 
 
Failure Code
Fault Code Description
Solution
PF
Power failure
PF flashes to indicate that a power failure occurred while the dryer was running. Press Start to continue the cycle, or press Pause/Cancel to clear the display.
E1
Temperature sensor open
E1 flashes in the numeric display when the temperature sensing circuit is open. Replace temperature sensor if faulty.
E2
Temperature sensor shorted
E2 flashes in the numeric display when the temperature sensing circuit is shorted. Replace temperature sensor if faulty.
E3
Blower rotation failure
If during a cycle the blower rotational speed drops below 500 rpms, all outputs will be turned off and error code E3 will be displayed.
E4
Tumbler rotation failure
If during a cycle the tumbler rotational speed drops to 0, all outputs will be turned off and error code E4 will be displayed.
E5
Dry rack sensor
If during a Dry Rack cycle the signal is lost, all outputs are turned off and E5 is displayed.
E6
Exhaust high limit fault
If the exhaust temperature goes above 87.7C (190F) all outputs will turn off and E6 will be displayed.
 
Find Parts
Fault Code Index