Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kitchen Aid Front Loading Gas and Electric Dryer Fault Codes  (Read 4175 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10926
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Kitchen Aid Front Loading Gas and Electric Dryer Fault Codes
« on: December 15, 2011, 12:59:28 PM »

Kitchen Aid Front Loading Gas and Electric Dryer Fault Codes (Models KGHS01PMT/WH and KEHS01PMT/WH)
 
 
Failure Code
Fault Code Description
Solution
PF
Power failure
"PF" flashes to indicate that a power failure occurred while the dryer was running. Press HOLD TO START to continue the cycle, or press OFF/Pause to clear the display.
E1
Thermistor open
Replace thermistor if found defective
E2
Thermistor shorted
Replace thermistor if found defective
E3
User interface or software mismatch
This error code will ONLY appear when in the Diagnostic Test mode.
 
 If the E3 error code is displayed, there is a user interface or software mismatch. It is also possible that a component on the console electronics or the electronic control board has failed. Replace defective component.
 

Find Parts
Fault Code Index