Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: ge profile fridge  (Read 2766 times)

Offline srodt1

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 9
ge profile fridge
« on: October 03, 2011, 05:20:05 PM »

 i have a ge profile fridge and the compressor will not turn on i have checked all ohm readings and volt readings per manual the manual says i should have 10 olms at the 3 prongs on compressor were the inverter plugs in i have only 8.2 is this an exeptible reading

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1262
Re: ge profile fridge
« Reply #1 on: October 03, 2011, 07:38:25 PM »
model number please

Offline srodt1

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 9
Re: ge profile fridge
« Reply #2 on: October 03, 2011, 07:55:15 PM »
model # is pfcs1rkza

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1262
Re: ge profile fridge
« Reply #3 on: October 03, 2011, 09:30:18 PM »
do you have power coming from the inverter board to the compresor and yes your readings should be ok

Offline srodt1

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 9
Re: ge profile fridge
« Reply #4 on: October 04, 2011, 08:32:55 AM »
what readings should i have at the compresor side of the inverter

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1262
Re: ge profile fridge
« Reply #5 on: October 04, 2011, 09:01:29 PM »
good question, i am trying to find what your reading should be.