You can easily remove the innards of the clutch with a pair of pliers and clean the clutch surfaces up with brake cleaner. Then replace the tranny cover seal. Remove the cover and knock the old seal out then install a new seal using a little lubricant and a wooden block to keep from marring the new seal. Click on pic to enlarge. Compress the spring on the clutch liner and lift it straight out the clutch.
« Last Edit: August 17, 2011, 05:15:50 PM by JWWebster »
May the hinges of our friendship
never grow rusty.
About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL