Customer asked me to look at it, I tried... Now I have a couple questions
Problem was it runs but no heat... very dusty. I wanted to see if the glow plug glowed, but it doesn't appear to be access to that from the rear of the machine. I got the front of the machine off and the drum came out and the id *ler pulley was laying in the bottom of the dryer after the drum came out. I need to see how the belt goes because I can't figure out how the idler pulley is positioned exactly because it fell out of it's spot when the drum came out.
Also, I found out after talking to a friend who works for an actual appliance repair co. that on some of them there is a plug on the front you can pop off to look at the glow plug... I think I remember seeing that....
Also he says the 110 for the glow plug comes from the timer.
I guess the only other thing to cause this would be the fuses and limits...
any insight would be helpful....
glad I have customers willing to be guinea pigs while I get more experience at working on appliances