Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: belt  (Read 3044 times)

Offline ohiobeavers70

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 3
belt
« on: April 29, 2011, 07:30:28 PM »

i replaced the belt but it seems there is not enough tension ad when I try to run it the motor pulley just spins around the belt.....

Model sav365zaww

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8809
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: belt
« Reply #1 on: April 29, 2011, 08:11:53 PM »
belt config:
 
Captain's Log Supplimental info:
Service manual
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline ohiobeavers70

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 3
Re: belt
« Reply #2 on: April 29, 2011, 08:20:57 PM »
hmm that is the way I have it... I can pout tension on the tensioner and then it will spin...

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8809
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: belt
« Reply #3 on: April 29, 2011, 10:19:43 PM »
did you install the correct belt?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline ohiobeavers70

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 3
Re: belt
« Reply #4 on: April 30, 2011, 02:00:10 PM »
yes.. i double checked and i do have the right belt