Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   AppliancePartsPros 

Author Topic: Replacing oven door strike in a top GE double oven  (Read 2414 times)

Offline bighank

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 2
Replacing oven door strike in a top GE double oven
« on: January 11, 2011, 03:05:38 PM »

How do you replace a Oven Door Strike Assembly (WB1X5508) on a GE double oven range top oven? What do you need to remove? Looks like there are several screws at the sides of the oven with a finish trim plate surrounding the oven. Do I simply remove all screws holding this trim panel and then attach the Strike Assembly to the Trim Plate? Looks like you have to remove door first. Strike looks like a plastic stud, 2 washers and a washer with several prongs to attach the stud to the trim assembly. My stud (the plactic piece that fits into the door to latch it) either broke off or detached from the washer in back of the trim plate which force fits onto the stud. What do I remove before ordering a new part and if a new part is required what do I do to replace it.

Model HC56G0D1AD


Replacing Control Board in Whirlpool Double Oven

Started by jennimac05

Replies: 10
Views: 9013
Last post July 05, 2012, 11:59:13 AM
by bigbuck
How can I find the manual for a Jenn Aire double oven?

Started by Dukes

Replies: 2
Views: 6213
Last post December 16, 2007, 04:40:06 PM
by Dukes
Maytag Double Wall oven lights

Started by jumptrout51

Replies: 2
Views: 7279
Last post December 23, 2007, 01:26:06 PM
by kjagmin
Thermador Double Oven No Operation

Started by TechnicianBrian

Replies: 0
Views: 3892
Last post March 20, 2008, 09:03:27 PM
by TechnicianBrian
Frigidaire Range, Oven Door falls Open

Started by TechnicianBrian

Replies: 0
Views: 7599
Last post August 23, 2008, 08:29:17 AM
by TechnicianBrian
Kitchenaid Double Oven F5 E1 Error

Started by TechnicianBrian

Replies: 0
Views: 6536
Last post October 30, 2008, 05:20:08 AM
by TechnicianBrian