When I start the washer it starts to go through the agitation cycle (the agitator works fine) for a short time, then stops and then will restart again and go through the same sequence of stopping and starting for the entire wash. It does make a buzzing noise when it is running, but the noise stops when the washer stops.
I thought it might be the lid switch, so I took it off and manually switched the switch myself and it didn't help. However, I did notice the wires were a bit warm when I was hooking the switch back up to the wiring harness. Now, since I removed the lid switch, it will just sit there and buzz now and not do whatever it should be doing in that part of the cycle. The buzzing sound is coming from the back of the knob where you set the cycle. Don't know if there might be a short or something in the knob.
Any help would be greatly appreciated!