Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Frigidaire Affinity Washer stops mid cycle  (Read 8412 times)

Offline Luigi

  • VIP Member
  • Member Since: Sep 2010
  • Posts: 1
Frigidaire Affinity Washer stops mid cycle
« on: September 27, 2010, 09:23:49 PM »

I recently purchased a house with the appliances included, and the washer and dryer are both Frigidaire Affinity series. Manufacture dates are 2006, and both are front load.

My problem is the washer will stop mid cycle, almost every time. Sometimes with 10 minutes left, sometimes with 1 minute left, and it just stays there, until I cancel it and then usually have to do a spin cycle because there is so much water left over and it needs to drain.

Googling led me to a

To resolve this issue, three jumpers have been added to the current motor controller board to reduce electrical noise levels around the microprocessor. Testing has proven this change to the board significantly reduces occurrence of control lock-up. The newist motor controller board assembly is Part Number 134149220.  

Wondering does the board need to be replaced or can these three jumpers be added to a board currently in. Also if anyone knows if Frigidaire covers this, as it seems like a design flaw to me.

Lastly if not, how would I go about replacing it myself. I`ve found what looks to be the correct service manual, but cannot find where to replace the motor controller board at. I`m a certified Electronics Tech and have work with CRT and other high voltage equipment, so hoping I can do this one myself with a little guidance.


Offline tj

  • VIP Member
  • Member Since: Mar 2013
  • Posts: 1
  • Country: us
Re: Frigidaire Affinity Washer stops mid cycle
« Reply #1 on: March 27, 2013, 07:13:21 PM »
I'm having this problem with my Frigidiare Affinity too, it just started a few weeks ago. I thought thought my sibling had come in my house and pressed pause to mess with me, but it happened again.

I bought the machine in 2010.
« Last Edit: March 27, 2013, 07:13:33 PM by tj »

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Frigidaire Affinity Washer stops mid cycle
« Reply #2 on: March 28, 2013, 07:48:27 AM »
Luigi,do you get any error codes?
Does the machine pump out water quickly?
Your drain pump trap may be clogged.
Take a Kid fishing.


Frigidaire washer model FAFW380ILW3- stops in mid cycle

Started by tcape

Replies: 1
Views: 1613
Last post March 20, 2014, 03:24:20 PM
by Wilson13
Frigidaire Washer - Noisy During Drain Cycle.

Started by AJ

Replies: 0
Views: 5960
Last post December 27, 2007, 07:54:12 PM
by AJ
5995536298 Frigidaire Affinity 6000 & 7000 Series Washer Service Manual

Started by AJ

Replies: 0
Views: 3964
Last post August 15, 2012, 09:39:22 AM
by AJ
frigidaire washer smoking and only spins on rinse cycle

Started by jazzly

Replies: 3
Views: 5993
Last post November 09, 2008, 09:51:21 AM
by Repair-man
Frigidaire Top Load Washer Timer Stops At Same Spot Every Time

Started by grace1717

Replies: 31
Views: 17500
Last post May 04, 2013, 02:45:01 PM
by abzaatari
Roper Washer Stops during the Wash Cycle.

Started by TechnicianBrian

Replies: 1
Views: 5033
Last post May 28, 2013, 03:37:08 AM
by Rick32k