Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: 80 washer: cycle stop at drain. Itnot lid, switch timer, coupler, clutch  (Read 2545 times)

Offline beamer

  • VIP Member
  • Member Since: Aug 2010
  • Posts: 2

Model 11026892690  Kenmore washer. 
cycle stops at rinse with full tub. No noises.
Can set timer to another cycle to drain, but will not spin.
Lid switch tests good, and bypassing did not fix issue. 
Replaced timer, coupler (it was shot) and clutch band. 
What am I missing?
Thanks for your help.

Offline Earl Dryer

  • Technician
  • Member Since: May 2008
  • Posts: 165
  • Country: us
Check your water level switch. May not be making contact when it opens from the fill cycle (Purple to tan) should have continuity with full tub and purple to pink open.

Offline beamer

  • VIP Member
  • Member Since: Aug 2010
  • Posts: 2
Thanks for the info.  I cleared the tube and it cycled into drain and spin - and it ripped up the new coupler.  guessing a bad break or transmission.


maytag Atlantis washer timer switch doesn't activate spin cycle

Started by helpme805

Replies: 6
Views: 12705
Last post July 30, 2011, 08:35:12 PM
by AJ
Kenmore 400 washer won't drain or spin - No blockage, Not switch, Not coupler.

Started by BoldL1k3L1on5

Replies: 0
Views: 966
Last post February 04, 2015, 03:31:10 PM
by BoldL1k3L1on5
Maytag Washer MAH4000AWW Timer Knob Does Not Stop, Runs Cycle Within Minutes

Started by cochese99

Replies: 1
Views: 957
Last post April 13, 2015, 04:52:03 PM
by cochese99
Frigidaire Washer - Noisy During Drain Cycle.

Started by AJ

Replies: 0
Views: 5970
Last post December 27, 2007, 07:54:12 PM
by AJ
WJRR4170E1WW GE Washer keeps going into next cycle, replaced timer still does sa

Started by jim floyd

Replies: 11
Views: 9126
Last post October 30, 2011, 07:45:49 AM
by Radar_rick
GWS1749CS0 Gibson Washer - Timer does not advance in any cycle.

Started by whirlpooltech

Replies: 2
Views: 2223
Last post October 15, 2011, 07:32:18 AM
by whirlpooltech