Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: tub not spinning again  (Read 2376 times)

Offline daniel

  • VIP Member
  • Member Since: Jul 2010
  • Posts: 1
tub not spinning again
« on: July 17, 2010, 07:51:31 PM »

 2 months ago tub wouldnt spin. I took it to a place after i changed the motor coupling and they put a used motor on w/a 30 day warranty. 31 days later it stopped spinning again. I want to put a new motor on which i should have done in the 1st place. Is any one familiar w/this problem? Why would the motor work on other cycles but the spin? Any advice is greatly appreciated.

Model lsr8010pq0

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: tub not spinning again
« Reply #1 on: July 17, 2010, 08:06:57 PM »
Here is the part number for your motor, part 389248.

WHIRLPOOL 389248 Direct Drive Washer Motor, part number: AP2907974

You may also find this topic helpful.

Video: Whirlpool Washing Machine Drive Motor Replacement.

Why would the motor work on other cycles but the spin?

The motor turns one way for the agitate cycle and turns in the reverse direction for the spin cycle. The motor will not get any power if the lid switch is bad.

Also if there is anything stuck between the wash basket and the outer tub it could keep the washer from spinning. Feel around the inside of the tub towards the top to make sure something did not get caught in between the two tubs.

Can you hear the motor hum like it's trying to run during the spin cycle? - Over 2 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!


Kenmore Elite Top of the Line quit spinning

Started by Bishop

Replies: 11
Views: 14952
Last post September 06, 2007, 05:24:55 PM
by AJ
agitator not spinning

Started by whit

Replies: 2
Views: 4474
Last post October 22, 2007, 06:21:57 PM
by Pegi
Maytag performa spinning out!

Started by lowhook

Replies: 39
Views: 29321
Last post July 07, 2009, 11:13:44 PM
by JWWebster
Humming Noise While Spinning

Started by Bubba50111

Replies: 7
Views: 5571
Last post April 17, 2008, 10:40:39 PM
by BrntToast
Kenmore 80 heavy duty Not spinning

Started by BAJADAVE

Replies: 10
Views: 7539
Last post April 22, 2008, 09:33:02 PM
Kenmore Washer Not Spinning Properly

Started by TechnicianBrian

Replies: 0
Views: 4838
Last post April 23, 2008, 10:10:20 PM
by TechnicianBrian