Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Cambridge Agri heater conversion  (Read 6322 times)

Offline robnofziger

  • VIP Member
  • Member Since: Dec 2009
  • Posts: 1
Cambridge Agri heater conversion
« on: December 16, 2009, 09:12:00 AM »

Dear sir.  

I'm attempting to do the same conversion on an old Cambridge Agri heater model A60, 60,000 btu unit.  The tag on the gas valve is very deteriorated. The Unitrol model # is ??00 AE-?20  max 1/2 PSI Regulator 60 hz Vac .034 AMP.  I removed the plate next to the on/off valve and the circular gasket looked the same as what you showed in your kit without a spring or any other hardware.  I've gotten the main and pilot orifices changed and need to reduce pressure.  Would the kit you offered to the other person that inquired work for me and if so, would you have another one?  Thanks for your consideration.

« Last Edit: December 16, 2009, 10:28:19 AM by Al Capone »

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
Re: Cambridge Agri heater conversion
« Reply #1 on: December 16, 2009, 10:30:14 AM »
Hi robnofziger,

Please be sure to read, Posting Basics - Starting a New Topic.

Note were it says towards the bottom.

Please do not ask your own question in a topic.
In other words, please don't hijack the topic and make it yours.
Start your own topic and reference the other topic related to your issue.

I have made your reply into a new topic and referenced the other topic that was related to your issue.

Thanks for posting your questions. - Over 2 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Cambridge Agri heater conversion
« Reply #2 on: December 16, 2009, 12:00:14 PM »
Rob can you post a picture of the valve? you going from propane to nat or vice versa?
« Last Edit: December 16, 2009, 12:01:51 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair