Here is the diagram I found of your dryers heating element.
On this model your heater is located at the rear of the dryer near the top center.
You need to lift the top of the dryer to access it.
I often find #5 is bad and have to install have to install this Thermostat Kit Part # LA-1053
To check the #5 thermal fuse use your ohm meter.
A good fuse will check shorted, just as if you shorted your meters together.
A bad fuse will check open, just as if you held your probes apart from each other and got no reading on the meter.
As for your heating element it will check the same way if it's bad, there will be no reading at all on the heating element if the element is burnt open. You can also remove the heating element and simply look at the coil for a broken spot in the wire.