Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: WASHER agitator won't lock down  (Read 2064 times)

Offline rdlh

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 1
WASHER agitator won't lock down
« on: October 06, 2009, 02:55:49 PM »

I bought a new coupler and agitator and when under load the agitator comes loose.  What is causing it to not lock down?

Model WMSR2100TAWW

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8809
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: WASHER agitator won't lock down
« Reply #1 on: October 06, 2009, 03:12:52 PM »
After you bolt the agitator drive block securely to the tranny you SNAP down the agitator to it.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL