Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore dishwasher  (Read 7949 times)

Offline lcsw

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 3
Kenmore dishwasher
« on: January 27, 2008, 09:39:21 AM »

My dishwasher stopped was one month old when we bought the house and we used it only a couple of dozen times at most.   We replaced the inlet valve because the solenoid appeared to be shot.  The float valve is clean and the switch checks out with the multimeter. Then we got only the tiniest trickle of water into the machine.(It works fine, by the way, if filled with a bucket)

  So we replaced the old copper tube with a larger diameter hose to the inlet because we thought perhaps the water was too slow.  Now it seems to fill adequately for the wash, but still won't fill for the rinse cycle.  I don't know what to try's really maddening, especially because the machine has hardly been used.  Naturally, the warranty is long over in spite of this.  

I told my kid I could figure out how to fix this and I'm totally NOT handy.....please help me save face with my teenager!

Model Kenmore 15522000 quiet guard

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore dishwasher
« Reply #1 on: January 27, 2008, 10:29:42 AM »
possibly 665.15522000 made by Whirlpool

If you could check the voltage at the fill valve while in the Fill & Rinse cycles.
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline rickgburton

  • Technician
  • Member Since: Oct 2007
  • Posts: 228
  • Country: us
  • Ricks Appliance Repair - 30 Years Experience
    • Buy me a beer through paypal
Re: Kenmore dishwasher
« Reply #2 on: January 29, 2008, 09:31:51 PM »
I agree with RegUS_Pat_Off, sounds like the timer is giving you the problem.

Offline lcsw

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 3
Re: Kenmore dishwasher
« Reply #3 on: February 08, 2008, 04:50:56 PM »
Thank you so much for your suggestions!
I figured out that the tube to drain the washer wasn't as high as it should  have been, therefore, the machine was draining as  it was filling.
It seems to be working fine now.  I appreciate you taking the time to help me out.

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10865
  • Country: us
    • - Appliance Repair
Re: Kenmore dishwasher
« Reply #4 on: February 08, 2008, 05:04:28 PM »

Glad to hear you got it working.
Thanks for posting a update.  O0


Kenmore Dishwasher - Doesn't always drain.

Started by yeltu1188

Replies: 1
Views: 7405
Last post September 15, 2007, 10:36:53 AM
by Pegi
Kenmore Elite Dishwasher

Started by sparky823

Replies: 8
Views: 10479
Last post October 11, 2007, 09:16:14 AM
by Pegi
Kenmore Elite Dishwasher Does Not Start

Started by rgletter

Replies: 5
Views: 9349
Last post December 14, 2007, 07:45:52 PM
by rickgburton
Kenmore 665 dishwasher chopper assembly cover

Started by tomnewf

Replies: 2
Views: 11761
Last post January 06, 2008, 10:59:43 AM
by AJ
Kenmore dishwasher motor problem

Started by lgmccoy1

Replies: 3
Views: 12023
Last post February 22, 2008, 11:06:24 AM
by RegUS_PatOff
Kenmore Ultra Wash Dishwasher

Started by gred25

Replies: 2
Views: 5193
Last post May 14, 2008, 05:48:46 AM
by Repair-man