Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: whirlpool washer model LXR9245EQ1- won't drain-slow spin  (Read 10580 times)

Offline fixmeplz

  • VIP Member
  • Member Since: Dec 2007
  • Posts: 2
whirlpool washer model LXR9245EQ1- won't drain-slow spin
« on: December 19, 2007, 02:23:58 AM »

I am new to the board, thank you for your help in advance.

My washer filled and went through the wash mode fine, when I went to put the clothes into dryer I noticed it had not finished the cycle and was just sitting on rinse.

I then selected the spin mode and although the washer did spin it never did pick up enough speed, and it will not drain.  I tried every cycle and had the same result each time. So it will agitate fine, it will not drain so it won't rinse, and spin is very slow.

How do I drain the washer manually? Where do I go from here?

Any ideas?

I have never taken apart a washer before, but am pretty handy for a mom!


Model Number: LXR9245EQ1 icon

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10865
  • Country: us
    • - Appliance Repair
Re: whirlpool washer model LXR9245EQ1- won't drain-slow spin
« Reply #1 on: December 19, 2007, 10:03:09 PM »

This video will show you how to take the cabinet off the washer.

If the washer spins, but the water does not pump out I would look for a kinked drain hose on the back of the washer first.

Then I would remove the cabinet and check the water pump to see if something got in it.

Let me know what you find or if you need any more help.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8809
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: whirlpool washer model LXR9245EQ1- won't drain-slow spin
« Reply #2 on: January 16, 2008, 10:13:02 PM »
It must be something inside the pump. The reason I say it is the water pump is mounted on the drive motor and the drive motor is mounted on the tranny on this bad baby. It is called a direct drive model. For it to be dragging can only mean one thing and I have seen this with my own eyes. A pair of pantys, a bikini top, a baby sock ALL can get into the pump and the pic below is your pump. Look here....lay that drain pipe down level with the floor. The gravity should make the water come out of the drain pipe full strength. If it does not flow out rapidly then my diagnosis is right. Something has lodged into the pump.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL


Whirlpool Washer fills but does not agitate, spin or drain - Model LSQ9564MQ0

Started by dksagun

Replies: 21
Views: 14318
Last post April 06, 2013, 05:47:15 PM
by fairbank56
Kenmore washer by whirlpool, slow spin

Started by deemessingup

Replies: 2
Views: 7774
Last post November 12, 2007, 02:47:14 PM
by deemessingup
Whirlpool Washer Slow to Drain

Started by TechnicianBrian

Replies: 0
Views: 3999
Last post March 20, 2008, 07:50:14 PM
by TechnicianBrian
whirlpool washer. No drain or spin

Started by MajorApp

Replies: 3
Views: 7372
Last post March 30, 2008, 10:24:00 PM
by AJ
whirlpool washer model LSR9434PQ0 won't agitate or spin

Started by jhuffman

Replies: 4
Views: 6160
Last post May 28, 2012, 06:16:50 PM
by JWWebster
Whirlpool Washer won't progress to drain, spin cycles

Started by norcalnative

Replies: 8
Views: 6969
Last post May 03, 2009, 01:30:05 AM
by laundryman