Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Buit-In Oven - No heat  (Read 5158 times)

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10865
  • Country: us
    • - Appliance Repair
Whirlpool Buit-In Oven - No heat
« on: December 28, 2007, 07:41:25 AM »

Model Number: RBS305PDT14 icon

I found you could set the temperature on the oven, but the bake element would not come on.
At first I thought it maybe just a bad bake element, but then I tried the broiler.
I could set the broiler to come on, but the broil element also did not heat. In fact everything on the oven clock seem to work ok, but I could not get the bake or broil element to come on. They told me it stopped working after they ran a self clean cycle.

I removed the oven from the wall and took the back panel off. There is a high limit thermostat (Thermister) on the back of the oven. I checked it with a ohm meter and it checked open, bad just like a bad fuse.
Installed a new high limit thermostat (Thermister) and the oven worked.

« Last Edit: March 16, 2008, 06:35:29 PM by AJ »


Whirlpool Oven Will Not Heat

Started by mknepper

Replies: 6
Views: 4923
Last post September 15, 2011, 01:14:33 PM
by JWWebster
Whirlpool Range RF364PXYQ2 oven does not heat during the bake cycle

Started by AJ

Replies: 0
Views: 2752
Last post January 04, 2012, 05:08:51 PM
by AJ
Kitchenaid KEBC107 Oven No Heat

Started by thepicker

Replies: 5
Views: 12351
Last post January 16, 2008, 04:00:06 PM
by RegUS_PatOff
Whirlpool Range No Oven Operation

Started by TechnicianBrian

Replies: 5
Views: 6970
Last post April 24, 2008, 01:32:13 PM
by JWWebster
Whirlpool Oven E1 F2 Error

Started by TechnicianBrian

Replies: 0
Views: 24024
Last post July 11, 2008, 07:59:01 AM
by TechnicianBrian
Whirlpool Built in oven clock is blank and oven beeps when not on

Started by Ryan

Replies: 4
Views: 5553
Last post August 06, 2008, 04:47:54 PM
by Ryan