Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Frigidaire Front Load Washer  (Read 5327 times)

Offline Boo

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 1
Frigidaire Front Load Washer
« on: January 28, 2009, 10:34:53 AM »

Washer tub will not turn or spin. I found an electrical componet had fallen off the Spin Control Module, Frigidaire Part #134285700. The componet is a small black two prong part about the size and shape of a nickel, it has markings NTC 2.5 0328. I soldered it back on and the washer worked fine for two days then went out again. Checked the componet and the solder had melted again. Can't get it to work now. I think I need a new Spin Control Module but am not sure if it could be something further back in the circuitry causing the problem and I might be wasting money??


Model FWT645RHS0

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 369
  • Country: ca
Re: Frigidaire Front Load Washer
« Reply #1 on: January 28, 2009, 12:31:01 PM »
That part is a capacitor and it probably fell out because it overheated. You need a new speed control module.


Frigidaire Front Load washer making noise.

Started by curtis

Replies: 3
Views: 12852
Last post July 05, 2007, 09:25:04 PM
by AJ
frigidaire front load washer

Started by Mikki

Replies: 6
Views: 9940
Last post October 17, 2007, 04:42:52 PM
by Mikki
Frigidaire Front Load Washer - Tumble Action Washers with AC Drive Motor Service

Started by AJ

Replies: 0
Views: 5175
Last post January 10, 2009, 09:55:36 AM
by AJ
frigidaire front load washer

Started by diyguy

Replies: 2
Views: 4264
Last post January 27, 2009, 01:33:58 PM
by Mr. Fix-It
FRIGIDAIRE front load washer wil agitate but will not go into a final spin

Started by sjcjmc

Replies: 7
Views: 11221
Last post February 02, 2009, 11:47:19 AM
by Penguin45
Front-Load Frigidaire Washer

Started by natklep

Replies: 5
Views: 5519
Last post March 13, 2009, 09:06:12 AM
by natklep