I have a WWA5600GAL washer that I have had for about 19 years. Recently, I put clothes in it and turn on the machine like I have done thousands of times. It would not start. It does not make a sound. Like it is DEAD! Before it died, I remembered that at times, various times during the recent months I had to regularly clean the water valve screens of calcium crud coming through the water hoses due to a horrible noise it caused when the machine took in hot water to wash hot water loads of clothing. Thus, I decided to install a new washer water valve, along with a timer and a new lid switch. I purchased and installed the factory recommended replacement parts. I made sure that I installed the new parts precisely the way the original parts were in. I, I then, turned on the machine. It still does not work. I checked the outlet. It works. I plugged in my radio to make sure of it. What other part in the washer could I check or change? not of the wiring look frayed or bad. Does the machine carry an internal fuse that might need changing?