Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Sears Kenmore HD80 Series Washer Skipping Rinse Cycle  (Read 6420 times)

Offline rljulian

  • VIP Member
  • Member Since: Dec 2008
  • Posts: 1
Sears Kenmore HD80 Series Washer Skipping Rinse Cycle
« on: December 07, 2008, 03:52:12 PM »

I currently have a Sears Kenmore Model 110.82781100 HD80 Washer.  The symptoms I have are that it skips the rinse cycle; i.e., during the rinse and spin cycle, the washer pulses on for about 5 seconds, and then shuts off.  There is no water pumping or draining out of the basin.

Based on my Sears Repair Manual, I am trying to remove the timer assembly, but I am unable to correctly remove the timer dial/indicator.  I pushed in the Timer Knob, then turned counter clockwise to remove (I have the new design threaded Timer Knob).  There is a plastic Timer Ring and the dial/indicator still remaining. The dial/indicator has 3 tabs around the inner circumference.   I could not find any photos or steps that shows how the dial should be removed.


Robert Julian - Houston, Texas

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8809
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Sears Kenmore HD80 Series Washer Skipping Rinse Cycle
« Reply #1 on: December 07, 2008, 07:02:30 PM »
That might be one of them kind that needs you to pull a lever out the back of the timer a tad so the knob will come right off. If the timer has a plastic housing then you need to pull out the rod a quarter inch and that will let the knob come off.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 369
  • Country: ca
Re: Sears Kenmore HD80 Series Washer Skipping Rinse Cycle
« Reply #2 on: January 14, 2009, 08:07:55 AM »
It just pulls straight off with a little force or wedge a scraper under it and work it loose.


Sears Kenmore Washer 80 series not draining but agitates and spins OK

Started by mem1966

Replies: 4
Views: 9625
Last post February 06, 2009, 04:20:43 PM
by jumptrout51
Kenmore 90 Series Washer with Spin Cycle issues

Started by B_con

Replies: 2
Views: 6791
Last post February 28, 2009, 08:27:56 PM
by JWWebster
sears kenmore washer series 70

Started by peggy423

Replies: 10
Views: 10363
Last post September 12, 2009, 05:53:25 PM
by JWWebster
Kenmore 70 Series Washer - no cold water, weak spin cycle?

Started by Q451990

Replies: 10
Views: 9071
Last post January 28, 2010, 08:31:18 PM
by viking351
Sears Kenmore Model 110 Stops at Rinse Cycle

Started by MUD

Replies: 2
Views: 2769
Last post April 18, 2012, 09:54:03 AM
by AJ
Kenmore 90 Series washer: Cold water does not fill wash, but fills rinse

Started by purnell1

Replies: 4
Views: 3413
Last post December 02, 2013, 07:52:49 AM
by purnell1