It displays normal time once the cleaning mode fails, and no error codes appear on the display.
Here is the sequence:
1. Press cleaning mode (a, b, c can then be observed):
a Two dashes appear on the display (we think this is normal)
b. The LED by the touch-button we just pressed for clean starts to blink (we think this is normal)
c. you can hear that the oven has turned on and beginning to go to cleaning mode
2. About 20 seconds go by and you here it click off (display goes back to normal time and no codes appear)
3. The letters CL never appear on the display like they normally would in cleaning mode and it never gets to the stage where the door locks.
Otherwise it seems OK (daughter used it to bake a pizza yesterday and had no trouble). Thanks again for your thoughts on this.