Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: whirlpool cabrio dryer wed7300wx0 throwing f22  (Read 459 times)

Offline ddamm01

  • VIP Member
  • Member Since: Sep 2017
  • Posts: 2
whirlpool cabrio dryer wed7300wx0 throwing f22
« on: September 08, 2017, 08:45:16 PM »

Ok folks I have this cabrio dryer that is throwing the f22 error code.  I have changed the exhaust thermistor, and cleaned out the exhaust of excess lint.
Yet this dang machine keeps throwing the same code.  Any other ideas as to what to try next?

Offline manden

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 139
Re: whirlpool cabrio dryer wed7300wx0 throwing f22
« Reply #1 on: September 09, 2017, 04:52:15 AM »
Have you checked the thermistor resistance at the control board.
Could be a bad wire or connector (open).

It that is OK then it could be a control board problem.

Offline ddamm01

  • VIP Member
  • Member Since: Sep 2017
  • Posts: 2
Re: whirlpool cabrio dryer wed7300wx0 throwing f22
« Reply #2 on: September 24, 2017, 08:29:41 PM »
Well after looking at all the recommendations I ran the wires from the thermistor and
low and behold one of them was cut in two.   yeah spliced wires and dryer is like new!! :) :D :thanks: