Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   AppliancePartsPros 

Author Topic: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.  (Read 436 times)

Offline nolazach

  • Technician
  • Member Since: Sep 2011
  • Posts: 450
GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« on: August 16, 2017, 02:58:43 PM »

Thing is leaking badly.   Obvious seal leak.
    Have assembly out,  beat the nut (left hand thread) and it won't budge. 
    Never had to change one on these machines before.   I way under bid. Lol..

Offline scrapiron

  • Technician
  • Member Since: Nov 2011
  • Posts: 430
  • Country: us
  • Service Tech Since 1974
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #1 on: August 16, 2017, 04:15:15 PM »
GE has a mechanism assembly because those things are TERRIBLE to tear down. Part # WH45X24614 for the 27" models. WH45X24615 for the 24" models
https://www.geapplianceparts.com/store/parts/spec/WH45X24614

Offline johnboy3

  • Technician
  • Member Since: Nov 2012
  • Posts: 191
  • Country: us
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #2 on: August 16, 2017, 05:08:20 PM »
A 3 pound sledge and a cold chisel will take care of that nut in short order!

Offline olyteddy

  • Technician
  • Member Since: Jul 2012
  • Posts: 437
  • Country: us
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #3 on: August 16, 2017, 11:19:57 PM »
I usually use the whole kit too but sometimes have to remove the nut. If you look at the shaft the nut is on you'll notice it's basically square with the threads on the rounded corners. I use a 3/8" drill bit and drill down through the nut at one of the shaft flats. The nut is aluminum and the shaft steel so there's no harm done. However you will likely find that the pot metal bottom of the tub is probably corroded to the shaft too.

Offline shillion

  • Technician
  • Member Since: Jan 2011
  • Posts: 224
  • Country: ca
  • I have been repairing appliances since 1983
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #4 on: August 17, 2017, 09:46:18 AM »
I just did one which had a seized nut(this nut has fine thread).I had to drill at a spot with more meat,after that i used a heavy screw driver to break the nut very easily.

Offline nolazach

  • Technician
  • Member Since: Sep 2011
  • Posts: 450
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #5 on: August 17, 2017, 12:19:49 PM »
Wow.  Okay.
  So this nut has to be broken off.
 

Offline scrapiron

  • Technician
  • Member Since: Nov 2011
  • Posts: 430
  • Country: us
  • Service Tech Since 1974
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #6 on: August 17, 2017, 03:30:12 PM »
If you can't remove it with the spanner wrench and a big hammer, yeah drilling and breaking the nut is your only option. The chances are pretty good that the hub of the wash basket is corroded onto the spin shaft. The basket and transmission need to be removed to replace the seal. That is why the mechanism assembly is usually the best option.

Offline Blaiser

  • Technician
  • Member Since: Jun 2011
  • Posts: 595
  • Country: us
    • Buy me a beer through paypal
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #7 on: August 18, 2017, 08:41:22 AM »
Just had 2 in the past two weeks both shafts were seized to the shaft had to trash both!

Offline Major

  • VIP Member
  • Member Since: May 2010
  • Posts: 74
  • Country: ca
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #8 on: August 18, 2017, 09:30:48 AM »
Good day to all
I have been servicing GE washers for many years and I have been using a 1/2" drive impact gun to do the job.
mine is electric not air.
also I use a 3/4" drive deep impact socket with a 1/2" drive adapter.
see picture
Have not come across any nut I could not get off yet

Have a great day

Offline olyteddy

  • Technician
  • Member Since: Jul 2012
  • Posts: 437
  • Country: us
Re: GE combo washer/dryer spanner nut seized. Gtup270gm0ww.
« Reply #9 on: August 18, 2017, 10:05:06 AM »
Good day to all
I have been servicing GE washers for many years and I have been using a 1/2" drive impact gun to do the job.
mine is electric not air.
also I use a 3/4" drive deep impact socket with a 1/2" drive adapter.
see picture
Have not come across any nut I could not get off yet

Have a great day
True that. I have the same in our shop and use it on the full size Hydro Wave machines. Unfortunately it doesn't help when the drum has "welded" itself to the shaft.

 

LG TROMM WASHER DRYER COMBO

Started by cammy

Replies: 1
Views: 6286
Last post March 06, 2008, 07:46:35 PM
by JWWebster
LG washer/dryer combo. Not spinning

Started by mandu73

Replies: 26
Views: 15857
Last post October 07, 2009, 10:31:28 PM
by JWWebster
LG combo washer/dryer thermistor help

Started by flpirate

Replies: 16
Views: 12918
Last post April 19, 2011, 07:32:54 PM
by flpirate
LG WM3677HW Washer/Dryer Combo. Spin Issue.

Started by jvanness162

Replies: 14
Views: 12367
Last post June 17, 2011, 07:00:44 PM
by AJ
LG combo washer/dryer not draining fully, has slow leak

Started by flpirate

Replies: 7
Views: 6566
Last post July 25, 2011, 03:18:46 PM
by AJ
Oil leak on floor from washer/dryer combo.

Started by euges720

Replies: 1
Views: 2890
Last post December 06, 2011, 03:27:00 PM
by AJ