Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range & Oven Parts  ·   AppliancePartsPros.com 

Author Topic: ge french door fridge no start Model GFSL6KEXBLS  (Read 323 times)

Offline gregaguilar

  • Technician
  • Member Since: Jan 2012
  • Posts: 240
ge french door fridge no start Model GFSL6KEXBLS
« on: May 18, 2017, 02:44:30 PM »

tHIS REFRIGERATOR COMPRESSOR WAS ONLY CLICKING I REPLACED OVERLOAD AND START RELAY. It is still doing same thing and the overload i notice was hot. I am wondering if the board is bad. I took it off and i dont see any burnt marks on it. How could i go about checking to know for sure the board is bad. Thanks guys

Offline mz3own

  • Technician
  • Member Since: Apr 2014
  • Posts: 1582
  • Country: us
    • Buy me a beer through paypal
« Last Edit: May 18, 2017, 05:32:15 PM by mz3own »

Offline gregaguilar

  • Technician
  • Member Since: Jan 2012
  • Posts: 240
Re: ge french door fridge no start Model GFSL6KEXBLS
« Reply #2 on: May 19, 2017, 08:11:54 AM »
mz30wn I sure did

Offline gregaguilar

  • Technician
  • Member Since: Jan 2012
  • Posts: 240
Re: ge french door fridge no start Model GFSL6KEXBLS
« Reply #3 on: May 19, 2017, 09:00:28 AM »
On this unit i replaced the start rely it was slightly smaller than the one that was on there, the overload i also replaced with same look alike. I sure hat to order a new board and not fix this problem. Any one knows how to test for power from board to compressor? Also aftyer i replaced the relay and overload I noticed the compressor would click then in a few it would click again. I took it off and the overload was hot, but compressor never came on. Thanks guys


Offline mz3own

  • Technician
  • Member Since: Apr 2014
  • Posts: 1582
  • Country: us
    • Buy me a beer through paypal
Re: ge french door fridge no start Model GFSL6KEXBLS
« Reply #4 on: May 19, 2017, 09:21:15 AM »
J11 to j8 you should have 120vac
If the board is sending power, and the compressor is ohming out within range your start device is not correct  or the compressor is bad or shorting out 
https://drive.google.com/file/d/0B_NOHkzxyyTQREg0bEJ6M202NDQ/view?usp=drivesdk
https://drive.google.com/file/d/0B_NOHkzxyyTQYnlNSXQtdW5iclk/view?usp=drivesdk
« Last Edit: May 19, 2017, 09:24:37 AM by mz3own »

Online dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 3988
  • Country: us
Re: ge french door fridge no start Model GFSL6KEXBLS
« Reply #5 on: May 19, 2017, 10:37:30 AM »
Sounds like from what you are saying compressor is not starting and clicking off on the overload. You installed a new relay and overload but relay is not the correct part number but looks like the old relay. GE refrigerator made by Samsung.  Would think even with a look alike relay if the compressor was able to run it would.  Seems like a bad compressor.  This is the Tech sheet for your model. 

 

Ge profile French door fridge/bottom freezer drawer model Pfs22sbsbss acting up

Started by pgartner

Replies: 2
Views: 1274
Last post October 21, 2015, 08:01:21 PM
by pgartner
Fridge not cold ... french door model.

Started by mikebuild

Replies: 5
Views: 752
Last post June 22, 2016, 05:54:23 PM
by mz3own
ge french door fridge damper repair Model CWE23SSHCSS

Started by gregaguilar

Replies: 6
Views: 452
Last post March 22, 2017, 10:23:59 PM
by gregaguilar
KITHENAID FRENCH DOOR FRIDGE MODEL KBFA25ERBL01 defrosting problem

Started by shillion

Replies: 0
Views: 179
Last post May 24, 2017, 10:31:38 AM
by shillion
Buying a new refrigerator - looking at LG French door model ?

Started by rkpatt

Replies: 4
Views: 4259
Last post May 27, 2015, 08:23:29 PM
by Caddy4343
French Door Fridge not making ice.

Started by Jack Hodge

Replies: 6
Views: 7487
Last post November 26, 2008, 09:18:32 AM
by JWWebster