Thanks, I have called myself looking, some sites dont have it.
I am going to attach a photo of the cross bars, where they ran condenser line, I guess to heat door seals. This picture shows the second leak I found, due to water getting on steel line. This unit was left sitting after being washed down. Hope this helps those who resale and wash units. The two leaks were on the left side looking from the front.
The electrical connections for the evaporator and duct fan coming out of freezer has some thin flat male pins, these were corroded and one broke. I also had the light blue wire in the switch connection come loose and break.. This was the female plug side.
now who knows the technical size and type of these connectors and what tool do you need to get them loose.
I will probably have to cut out the evap fan connector to get access,.
The duct fan is shot and no longer available. My searching led me to a place where another said that you can replace the motor with part number EAU36179308 or EAU615013 . I hope this may help another and save valuable search time. Can anyone else confirm this as a good fix.?