Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: misplaced tech sheet  (Read 2407 times)

Offline joc

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 1
misplaced tech sheet
« on: September 29, 2008, 09:20:29 PM »

I have misplaced the tech sheet for my dryer and need to know which two buttons to push to get into test mode.

Model GLEQ952CW

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: misplaced tech sheet
« Reply #1 on: September 30, 2008, 05:16:01 AM »
To start the test programs, remove power from the dryer.
Reconnect power to the dryer and within 10 seconds
press and hold the temp and the stop pads for at least 2
seconds, then release. The control is now in the test

1. After activation, the WRINGLE RID icon should be

You didn't say what you intended to do after you got into the test mode, but you'll likely ask later. Would it not be easier to explain the problem you are having first?
« Last Edit: September 30, 2008, 07:41:34 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman


16026750 Tech sheet for Maytag MDG5500*, MDG6800* Dryer

Started by AJ

Replies: 0
Views: 1398
Last post December 09, 2011, 09:33:42 PM
by AJ
MGDE500VW2 Maytag Dryer Tech Sheet # W10258377 Rev # B

Started by AJ

Replies: 0
Views: 1271
Last post December 11, 2011, 12:11:39 AM
by AJ
8563816 Maytag EPIC Dryer Tech Sheet

Started by AJ

Replies: 0
Views: 2152
Last post December 13, 2011, 08:41:34 AM
by AJ
Htdp120ed2ww hot point dryer tech sheet schematic or service manual

Started by Kstang69

Replies: 0
Views: 196
Last post August 19, 2017, 10:39:28 AM
by Kstang69