Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Old Kenmore 80 Series - Just changed coupler, now nothing works  (Read 3107 times)

Offline jordan614

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 1
Old Kenmore 80 Series - Just changed coupler, now nothing works
« on: September 29, 2008, 05:08:54 PM »

hey folks,
I've got an old Kenmore 80 Series washer that probably needed a new coupler - it made noise, pumped water out and ran for the proper cycle time - it just didn't spin . . .
After doing some research it appeared to be the coupler . . .
So I bought one, took the darn thing apart and replaced the old cracked white plastic coupler . . .
Got everything back together and nothing worked . . .
I'm pretty confident that I plugged all the electronic guts back where they go, however, I clearly messed something up . . .
Any help would be great ! ! !

Thanks,

Model 110.9228480

 - Jordan

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8823
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Old Kenmore 80 Series - Just changed coupler, now nothing works
« Reply #1 on: September 29, 2008, 05:13:19 PM »
Maybe you forgot to plug in that machine lid switch? Got power? Harness plugged into motor? lid shut? water on? Power bill paid? :D
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair