I've got a GE profile washer about 7 years old. Model wpre6100g0wt that won't spin fast anymore. Replaced the mode shifter after ohming the old one. Circuit was open. Still no fast spin. Long story short ended up trying a different control board, ac line filter and motor with same results. No fast spin. Ohmed the new mode shifter just to check and get 67ohms. New ones are supposed to be 98ohms. All test points on the motor connector pins get the proper voltages in test mode. About to trash it but already have so much time and money invested I just can't bring myself to do it. Any suggestions?