I have KitchenAid KSCS25INSS01 model that uses the Whirlpool 4389102
IR boards. No ice being made for several days. When I open the freezer door the red light on the right side blinks. To check the IR I open the door and press all the switches to make it think the door is shut, but the red light on the right side is off totally, not even a blink.
From what Iíve read this means bad IR boards so I did the paper clip jumper thing. Nothing happens in 30 minutes. Only difference is that one of my wires is Blu/yellow instead of the black color, but I have the jumper in slots 3 & 4 from the bottom (red). Should that do the trick? If so Iím really stumped, I thought getting no red light when I press the IR flapper and door trigger switch for sure means the IR is bad, but now if the jumper does not make the system work what could be the problem?
Looks to me that there is some ice in the mold but itís not getting pushed out. What should I check next?
BTW, I could not get any videos to run by clicking on them. Is there a trick here?