Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   AppliancePartsPros 

Author Topic: Accubake gas oven issue! Help!!!  (Read 2419 times)

Offline Wedgeman55

  • Technician
  • Member Since: Aug 2008
  • Posts: 1129
  • Country: us
  • Man vs Appliance - Never give up, Never surrender
Re: Accubake gas oven issue! Help!!!
« Reply #20 on: April 24, 2014, 10:29:18 PM »

Another thing I have found on these stoves.   Sometimes,   if it is acting funny (clicking twice,  then not lighting) ,    I will unscrew the screw holding the burner tube and ignitor and install a bigger screw.    If old screw has corrosion or crud on it,   it doesn't ground good.    Bagjr is right,   grounding is very crucial on these stoves.     

On the gas valve,   you should have continuity between all 3 terminals.   If you don't,   replace gas valve.   
Commercial Laundry repair Tech and Installer  1973 to 1980
Service Manager / Technician Commercial Laundry repair company 1980 to 2002
Refrigeration - HVAC - Boiler School 1974-1976
Electronic School 1978-1979
Self Employed Appliance Repair Company 2002 to present


Kitchenaid Microwave oven KHMS2056SSS2 issue

Started by Jonathan MacWilliams

Replies: 3
Views: 2474
Last post March 01, 2014, 12:07:53 PM
by AJ
Kitchenaid Microwave oven KHMS2056SSS2 issue

Started by Jonathan MacWilliams

Replies: 2
Views: 1649
Last post August 06, 2016, 10:29:57 PM
by alan1967
Oven Door latch issue whirlpool gold microwave oven combo GMC305PRY01

Started by mrbandit

Replies: 0
Views: 488
Last post December 16, 2015, 11:58:14 PM
by mrbandit
Whirlpool Accubake oven won't light

Started by unclewilco

Replies: 0
Views: 497
Last post August 01, 2016, 06:00:48 PM
by unclewilco
Frigidaire oven temp sensor probe?

Started by jon

Replies: 1
Views: 10591
Last post July 08, 2007, 06:06:26 PM
by AJ
Jenn-Air self cleaning oven problem

Started by ralphthedog

Replies: 6
Views: 17059
Last post December 13, 2007, 08:15:34 PM
by ralphthedog