Forum Index > Range, Oven & Cooktop Repair



My timer has been slowly going dim on the display and  it finally got to the point where it wouldn't work at all to turn the oven on or anything.  I pulled it apart and found one of the caps to be blown.  I had an electronics repair shop replace the caps and clean up some light damage.  The timer then worked for a day and went blank again.  This time we pulled it back off and replaced a zener diode which appeared to have possible damage as well.  It did not fix the problem. 

The shop is confident they can fix it if we could find a schematic for the timer.  Does anyone know where I can find one? 

Also I have looked everywhere for a replacement timer and I can not come up with anything. does not have them and will not service them anymore.


If there are any control board schematics out there, they are a very well kept secret.  I don't see your part number, 74001283, on or repair lists. There's one on ebay right now for about $65 shipped. 


[0] Message Index

Go to full version