Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Md GEW9200LW0  (Read 1588 times)

Offline Caddy4343

  • VIP Member
  • Member Since: Oct 2007
  • Posts: 181
Whirlpool Md GEW9200LW0
« on: December 21, 2013, 05:14:30 PM »

Whirlpool Md. GEW9200LW0.  PF code pops up and machine shuts off.  Replaced the power board [main board] and it worked fine for about a week.  Now it's shutting down again.  Any ideas?  Thanks

Offline schleven

  • Technician
  • Member Since: Nov 2010
  • Posts: 1095
  • Country: us
    • www.katy-appliance-repair.com
Re: Whirlpool Md GEW9200LW0
« Reply #1 on: December 21, 2013, 09:02:00 PM »
I had a customer with this problem. It turned out to be poor wiring at the outlet.
"It's not what happens to you, it's what you do about it"

Offline Caddy4343

  • VIP Member
  • Member Since: Oct 2007
  • Posts: 181
Re: Whirlpool Md GEW9200LW0
« Reply #2 on: December 21, 2013, 09:16:28 PM »
Thank you.  I'll check that out on Monday.  I Googled it and found a case where it was a bad thermistor.  Sounds dubious but with electronics.... just about anything is possible.

Offline schleven

  • Technician
  • Member Since: Nov 2010
  • Posts: 1095
  • Country: us
    • www.katy-appliance-repair.com
Re: Whirlpool Md GEW9200LW0
« Reply #3 on: December 21, 2013, 09:42:16 PM »
Thats funny, my customer told me the same thing. Kept insisting i check the resister cause he read about it on the internet.
"It's not what happens to you, it's what you do about it"