Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: TE1 on LG Dryer...thermistor checking out ok.  (Read 1209 times)

Offline Matt Benzing

  • VIP Member
  • Member Since: Nov 2013
  • Posts: 1
TE1 on LG Dryer...thermistor checking out ok.
« on: November 24, 2013, 04:09:51 PM »

I have an LG DLE5977 dryer that was making a loud rumbling noise. I replaced the faulty roller but when I turned the dryer back on I got a TE1 error. Find it hard to believe that the thermistor would just happen to go out at the same time that I did a replacement. I've taken out the thermistor and checked the resistance and it seemed fine. What else could it be? I thought I might have bumped something loose when I took the drum out but I don't see anything that appears loose.

Thanks in advance.

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 2610
  • Country: us
    • Buy me a beer through paypal
Re: TE1 on LG Dryer...thermistor checking out ok.
« Reply #1 on: November 24, 2013, 07:00:27 PM »
May have bumped the connections somewhere during dis assembly. Thermistor is a variable resistor and quite frankly, do not go bad. check the clear 6 pin connector at the main pcb... O0 O0


134587700 Frigidaire Dryer Thermistor

Started by AJ

Replies: 0
Views: 4310
Last post May 05, 2009, 02:47:44 PM
by AJ
Kennore Dryer problems

Started by smckeown

Replies: 6
Views: 13215
Last post July 10, 2007, 09:31:02 AM
by smckeown
LDG7304 Maytag Dryer - making a lot of noise.

Started by robert

Replies: 5
Views: 12329
Last post February 20, 2011, 07:33:06 PM
by jumptrout51
Amana dryer making noise

Started by bigvonne

Replies: 2
Views: 6321
Last post January 19, 2015, 08:44:57 AM
by Thorning
Maytag Dryer Problem

Started by jborden

Replies: 10
Views: 14947
Last post August 15, 2007, 12:06:18 PM
by AJ
Kenmore Dryer

Started by jdman

Replies: 6
Views: 10218
Last post August 12, 2007, 07:30:06 PM
by AJ