Forum Index > Range, Oven & Cooktop Repair

Oven spark electrode won't stop clicking

<< < (2/2)

Hello I have the very same issue 2 Burner KitchenAid Cook top
in a “Motorhome  KA  Model # KGCR025BBL3  Spark Module
Whirlpool #  4454427 The issue is It just keeps sparking
the cooktop lights fine But the Spark module NEVER quits
sparking. After  trying a few things I called a appliance
repair and he found out the Spark Module was no longer
available paid for service Call, Now can not find the right
part # anywhere. There must be someone that can repair
the spark Module or another Universal Item that my work
The motorhome was stored for a few months and the
cook top worked fine the motorhome was plugged into
power I checked things out one day and I could here the
module sparking. If any one has any ideas that would be great.

Thank You For your Help

Please start a new topic so we don't hijack this thread. I'll try to help you out.

So, I checked the wiring to make sure that the connections are correct following the wiring diagram on the back of the oven and made sure that the connections were tight, and, made sure the ground wire had a clean contact. Checked that the flame was between the pilot and the igniter. Oven burner ignited normally but still the igniter continues to click away. Is time to replace the igniter and gas pilot assembly? Logic is telling me that sometime may be grounding out or that rectifier is not sensing the flame to stop the igniter.


[0] Message Index

[*] Previous page

Go to full version