This GearWrench is a tool that I have found to be very versatile and well made. I have been using the one shown in the photos below on just about a daily bases for at least ten years or longer now. One end of the wrench is 1/4" and the other is 5/16", two of the most popular sizes I find myself using in the appliance repair field.
As I was cleaning out my toolbox this weekend I thought about how handy it has been over the years and how it would be nice to have a second one to keep in my other vehicle.
As you may have notice in the photo above the bits and sockets in the set don't look like they have ever been used.
Well to tell you the truth they have not.
I use the GearWrench that come in the kit along with my own set of bits.
Like with my favorite 1/4" and 5/16" magnet bit drivers.
One thing I do use out of the kit besides the wrench is the 1/4" socket adaptor along with my deep well sockets.
I also use it with a number of screwdriver bits. The wrench has a small metal ring inside it that holds the bits firmly in place.
I could no longer find it on the http://www.gearwrench.com
site so I'm not sure if it has been discontinued now or what.
I was able to find it on Amazon yet so I ordered one to keep as a spare in my other vehicle. GearWrench 85035 35 Pc MicroDriver Set
You can see some additional photos of it in our gallery.http://appliancejunk.com/forums/index.php?action=gallery;cat=35
Any other GearWrench fans out there?