I have a Whirlpool Duet model number GEW9200LW0. The dryer runs normally, but the heating element does not get hot. I have verified the following components are in a normal condition.
Heating element resistance 8.5 ohms
Thermistor resistance 10.2k ohms
Thermal cutoff 0 ohms
Thermal fuse 0 ohms
Control board pin P2-5 to pin p2-6 12k ohm
The manual says to test all the individual items and then do the control board test if everything else tests fine. The control board test results I got are not in line with what the manual says (<1k ohms then replace thermistor, 6-7k ohms then replace the board).
It looks like all the wire connectors are in good shape and all the wiring looks good as well.