Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   AppliancePartsPros 

Author Topic: Maytag 3000 series won't spin  (Read 970 times)

Offline Damien7

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 2
Maytag 3000 series won't spin
« on: July 15, 2015, 05:07:14 PM »

I have a front load maytag 3000 series that was recently shipped by a moving company for me without the shipping bolts.  In runs normally except the spin cycle sounds like it's trying but maybe a gear or belt is not engaging...any thoughts on what could be wrong?  I'm fairly handy but not sure if it's something I could tackle or not.  Thanks for reading.

Offline mz3own

  • Technician
  • Member Since: Apr 2014
  • Posts: 1593
  • Country: us
    • Buy me a beer through paypal
Re: Maytag 3000 series won't spin
« Reply #1 on: July 15, 2015, 06:43:37 PM »
got an actual model number, might help narrow down some help.

Offline Damien7

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 2
Re: Maytag 3000 series won't spin
« Reply #2 on: July 15, 2015, 09:48:43 PM »
I actually took off the back and the belt was off and the power cord worn fairly deep...I put the belt back on and taped the cord and leveled the machine and all is well so far...appreciate your views/help

 

Maytag Neptune MAH4000AWW - No Spin.

Started by larry

Replies: 39
Views: 82187
Last post February 21, 2011, 01:22:14 PM
by bwhelan
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 6556
Last post December 25, 2007, 09:41:02 PM
by AJ
Maytag Neptune Washer - No Spin

Started by AJ

Replies: 6
Views: 10451
Last post February 20, 2008, 12:41:13 PM
by AJ
Maytag washer noise during high speed spin

Started by madbchron

Replies: 2
Views: 5872
Last post February 05, 2008, 10:03:59 AM
by JWWebster
Maytag Performa Won't Spin

Started by matthewdurango

Replies: 4
Views: 7233
Last post February 03, 2008, 02:36:16 PM
by JWWebster
Maytag LAT9356AAE Spin problem

Started by Camarocam

Replies: 2
Views: 6302
Last post February 20, 2008, 10:10:40 AM
by Repair-man