Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Dishwasher Whirlpool GU2500XTPB7 not working  (Read 2791 times)


  • VIP Member
  • Member Since: Dec 2012
  • Posts: 1
Dishwasher Whirlpool GU2500XTPB7 not working
« on: December 01, 2012, 09:32:30 AM »

Whirlpool GU2500XTPB7 dishwasher ***Need tech notes and manual

I was having intermittent problems with it not pumping out, and I would open and shut the dishwasher and it would start and finish the whole cycle.

Yesterday , it did they same and then would not drain. I chose the drain and cancel. It drained and then I got 1H code which I thought was a 1 hour delay.

I chose POT & PANS and was going to select the heat button , but The Normal Cycle Button started Blinking.....Was trying to reset the panel.

I turn off the circuit breaker overnight

I turn the circuit breaker on ...then have the number 2 in the timer and starts trying to drain.
Then I see 1H again and that goes out after a minute. Then the Normal Cycle Button started Blinking.

I would like to know how to troubleshoot this, not be a parts changer.

Offline Earl Dryer

  • Technician
  • Member Since: May 2008
  • Posts: 165
  • Country: us
Re: Dishwasher Whirlpool GU2500XTPB7 not working
« Reply #1 on: December 05, 2012, 06:57:47 PM »
Remove the bottom panel, a tech sheet should be located on the back side of panel.

Offline tgoods

  • Technician
  • Member Since: Jul 2010
  • Posts: 1858
  • Country: us
    • Buy me a beer through paypal
Re: Dishwasher Whirlpool GU2500XTPB7 not working
« Reply #2 on: December 05, 2012, 08:46:10 PM »
I have attached the tech sheet.   You probably have a stuck key on the console. The tech sheet should help you confirm it.