Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Need help w/wiring oven control switch, Roper FEP310VQ  (Read 2781 times)

Offline mcnairent1

  • VIP Member
  • Member Since: Nov 2012
  • Posts: 1
Need help w/wiring oven control switch, Roper FEP310VQ
« on: November 26, 2012, 08:37:00 PM »

switch shorted out two lower wires on both sides of control switch.  Got new switch but don't know exact placement of wires on lower part of both sides of switch.  Right side has 3 wires, a black, (upper) which didn't burn and is in correct place, and two on bottom that shorted out, a red and a black.  Which goes where?  On left side, there are six wires - four were not burned out, so have them correct, but bottom two have question about.  One is red w/white streak, the other is black (I think).  Which goes where?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10926
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Need help w/wiring oven control switch, Roper FEP310VQ
« Reply #1 on: November 26, 2012, 08:47:08 PM »
The wiring diagram should help you figure it out. I have attached a copy to this post.
Look it over and let us know how it goes or if you have any other questions.


Thanks for posting...