Forum Index > Dryer Repair



Can anyone tell me the correct way to set the automatic dryness sensor on the wed8800yc0 the procedure in  the owners manual is below. It does not work.
To change the drying settings:
NOTE: The settings cannot be changed while the dryer
is running or paused. The dryer must be in standby mode
(the Power button is off) to adjust the default settings.
1. Before starting a cycle, press and hold the TEMP
button for 6 seconds.
2. Press the DRYNESS LEVEL button to select the dryness
level shown in the time display: 01,02, 03, 04, or 05.
3. Press START/PAUSE to save the new Dryness Level


[0] Message Index

Go to full version