ApplianceJunk.com

Forum Index => Refrigerator & Freezer Repair => Topic started by: HUMZUKI on May 13, 2009, 10:42:30 AM

Title: How to exit Demo Mode
Post by: HUMZUKI on May 13, 2009, 10:42:30 AM
Im having this (http://appliancejunk.com/forums/index.php?topic=1405.0) exact problem with Model GFSL6KEXALS Its a french door with ice maker no water despencer. Any help would be greatly appreciated and I can save the service man from having to come out tomorrow. This one only has the 4 buttons non the top inside the doors. I believe it goes from left to right  Ice maker on/off Freezer there there are the 2 green digital number displays then refrigerator temp button and finally a energy saver button. Thats all. I bought it this past sunday as a floor model right now the displays both keep going back to saying off. I was told over the phone to hold the freezer button down and the energy saver at the exact same time for about 3 sec (it takes more like 10) but then it displays 0 0 ...and Im assuming thats when I put a code in?
Title: How to exit Demo Mode
Post by: HUMZUKI on May 13, 2009, 10:43:09 AM
 :D
Title: Re: How to exit Demo Mode
Post by: Al Capone on May 13, 2009, 11:46:42 AM
Hi,

Please be sure to read, Posting Basics - Starting a New Topic (http://appliancejunk.com/forums/index.php?topic=443.0).

Note were it say's towards the bottom.

Quote
Please do not ask your own question in a topic.
In other words, please don't hijack the topic and make it yours.
Start your own topic and reference the other topic related to your issue.

I have made your reply into a new topic.


Thanks,
Title: Re: How to exit Demo Mode
Post by: HUMZUKI on May 13, 2009, 12:00:52 PM
Sorry newb to the site.

Yea I bought the fridge as a floor model and everything turns on it just wont run. I called GE and they told me its on demo mode but what they told me to re set it wont work. The first guy just said to unplug it for a min and it will reset, ( nope) The other person told me to hold down energy saver and freezer buttons wait a few sec and it should re-set but it only shows 0 0 and theres a way to put numbers in but it seems random then in a few seconds it just beeps and displays off off again. no mater what i push its been gong back to off off
Title: Re: How to exit Demo Mode
Post by: HUMZUKI on May 13, 2009, 02:13:10 PM
GE guy came a day early fixed in 2 min for free 8)
Title: Re: How to exit Demo Mode
Post by: Al Capone on May 13, 2009, 04:52:46 PM
GE guy came a day early fixed in 2 min for free 8)

Good for you. Care to share with us what he did to repair it?
Title: Re: How to exit Demo Mode
Post by: Repair-man on May 14, 2009, 06:58:28 AM
I think I know that one...when in the diagnostic mode and testing has been completed, do one of the following things:
Enter code 1 5 to completely reset the system.
Enter code 1 6 to exit diagnostic mode. The temperature control panel is reset automatically.
Unplug the refrigerator for at least 10 seconds. Test mode will terminate when the refrigerator is
plugged back in.
Title: Re: How to exit Demo Mode
Post by: HUMZUKI on May 14, 2009, 07:36:43 AM
Thanks Ill keep that in mind if I accidentally put it on demo in the future. The GE guy said he didnt even know what he did really ??? Thats what he told my wife anyway she was home at the time 
Title: Re: How to exit Demo Mode
Post by: JWWebster on May 14, 2009, 11:04:31 PM
Now let me get this straight:
Answer: I enter code: 15 then code 16, then unplug the dang thang. I do the hoochie coochie then plug it all back in and I'm good.
Question: Say whut?  :D