ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: mrhud on September 13, 2012, 07:06:37 AM

Title: LG LDF6810ST Dishwasher
Post by: mrhud on September 13, 2012, 07:06:37 AM
Hi.  I'm new here.

I did a search for the parts/service manual for my dishwasher and found it no problem.

My issue though is which part I actually need.

There is no water being pumped up to the mid and upper sprayer arms, so the dishes on the top rack don't get clean.  Also there are no error codes on the display.  The dishwasher will go through its entire cycle normally.  I pulled apart and cleaned the sprayer arms and verified there are no blockages in the tubes leading to the sprayer arms.

What else can I do to troubleshoot the error in order to determine the defective part?
Should I just purchase a complete new sump assembly? 

Thanks.
Title: Re: LG LDF6810ST Dishwasher
Post by: mrhud on September 15, 2012, 06:45:11 AM
Anyone? Anyone?

Lol
Title: Re: LG LDF6810ST Dishwasher
Post by: wildimaginations on September 15, 2012, 10:42:10 AM
Check inside the front door panel for a broken wire.
Title: Re: LG LDF6810ST Dishwasher
Post by: mrhud on September 15, 2012, 02:09:05 PM
Thanks for the tip. I removed the front panel and everything seemed fine to me.

So what I did was remove the top of the sump assembly once again, and discovered that the valve check on the vario motor had a small crack in it and so was not turning when the vario motor turned.  A simple fix.

I've ordered the part.