Author Topic: Frigidaire GAS RANGE FGF337BCC  (Read 1488 times)

Offline dlenn845

  • VIP Member
  • Member Since: May 2012
  • Posts: 3
Frigidaire GAS RANGE FGF337BCC
« on: May 15, 2012, 12:56:27 PM »
I have the EOC without the number pad, only an up/down bake, clear, time, etc...  How do I view and set the oven temp offset?  My oven is consistently low and I have replaced the oven temp sensor.  I believe the unit is from 2004, the partial serial number is VF3253578.  Its not worth a service call or to replace the EOC, but I figure if I can correct the temp by using the offset then it will buy me some more time before I replace this stove.

The manual http://appliancejunk.com/forums/index.php?action=downloads;sa=view;down=286 referances a proceedure that includes a number pad(again I only have the up/down for temp).

Thanks for any assistance.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Frigidaire GAS RANGE FGF337BCC
« Reply #1 on: May 16, 2012, 03:34:08 PM »
.
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Frigidaire GAS RANGE FGF337BCC
« Reply #2 on: May 16, 2012, 03:58:31 PM »
Use your ohm setting to read the temp sensor.
1100 plus or minus 50 at room temp.
If more or less replace it.
Take a Kid fishing.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9501
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Frigidaire GAS RANGE FGF337BCC
« Reply #3 on: May 19, 2012, 10:14:35 PM »
Check it like JT said.


If you need to order a new temp sensor your model uses part # 316233902
Hope you find our site helpful.

Offline dlenn845

  • VIP Member
  • Member Since: May 2012
  • Posts: 3
Re: Frigidaire GAS RANGE FGF337BCC
« Reply #4 on: May 22, 2012, 02:09:46 PM »
Use your ohm setting to read the temp sensor.
1100 plus or minus 50 at room temp.
If more or less replace it.

Hi it was 1067 or something.  I replaced it anyway, same issue.  I need to know how to adjust the oven temp using my EOC just like the pic above using a similar procedure to the one documented with the EOC that DOES have a number pad.  Again thanks for any help.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Frigidaire GAS RANGE FGF337BCC
« Reply #5 on: May 22, 2012, 02:27:08 PM »
1100 plus or minus 50 at room temp.
If more or less replace it.
.. it was 1067 or something.  I replaced it anyway, same issue. 
that's within limits

... I need to know how to adjust the oven temp using my EOC
can't be done on that model

...

« Last Edit: May 22, 2012, 02:29:19 PM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline dlenn845

  • VIP Member
  • Member Since: May 2012
  • Posts: 3
Re: Frigidaire GAS RANGE FGF337BCC
« Reply #6 on: May 22, 2012, 02:30:38 PM »
The H### you say.  off to get some resistors from radio shack... I will bend the will of this oven.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Frigidaire GAS RANGE FGF337BCC
« Reply #7 on: May 22, 2012, 02:49:28 PM »
He may have a point REG.
It was done by someone somehow the first time.
dlenn845............let us know what you do and if it works.
Take a Kid fishing.

 

Frigidaire Range Oven Light Stays On

Started by TechnicianBrian

Replies: 0
Views: 6310
Last post May 09, 2008, 07:26:14 AM
by TechnicianBrian
Frigidaire Range no Bake or Broil

Started by TechnicianBrian

Replies: 0
Views: 3279
Last post May 13, 2008, 09:48:19 PM
by TechnicianBrian
Frigidaire Range, Oven Door falls Open

Started by TechnicianBrian

Replies: 0
Views: 5081
Last post August 23, 2008, 08:29:17 AM
by TechnicianBrian
Frigidaire Range Noisy While Baking

Started by TechnicianBrian

Replies: 0
Views: 3828
Last post October 07, 2008, 05:29:13 PM
by TechnicianBrian
Frigidaire Range stove will not work

Started by chaneyann

Replies: 8
Views: 6393
Last post November 27, 2008, 03:58:19 AM
by Repair-man
Frigidaire Range no Surface Indicator Light

Started by TechnicianBrian

Replies: 0
Views: 5368
Last post November 01, 2008, 08:34:48 AM
by TechnicianBrian