Author Topic: cordless tools  (Read 2698 times)

Offline andersenappliance

  • Technician
  • Member Since: Feb 2012
  • Posts: 704
  • Country: us
Re: cordless tools
« Reply #10 on: November 19, 2012, 02:11:24 PM »
I picked up a Dewalt 14.4 volt cordless drill on the ground at the dump back in the day.  It still turned, so I bought a charger for 10 bucks at a pawn shop.  Used it until the battery finally did not hold a charge - about 9 mos. later.  I coughed up $159 and got a dewalt 18v cordless, and have been using it for the last 5 years.  It still runs great, though the bit holder in the handle doesn't grip anymore after a drop from an 8 ft ladder.

I just invested $200 for the combo drill / impact driver with the same 18v batteries and charger.  Got the impact driver for those tough bolts, and the blower wheels & fan pulleys.  So now I have a back up for my cordless drill, the impact driver, two more batteries, and an extra charger.

Dewalt's website sure sucks, but their cordless drill has worked out great for me.

I still have not found a flexible extension that is worth a darn.


Offline Wedgeman55

  • Technician
  • Member Since: Aug 2008
  • Posts: 975
  • Country: us
  • Man vs Appliance - Never give up, Never surrender
Re: cordless tools
« Reply #11 on: November 22, 2012, 02:04:53 AM »
I have a mikita lith ion drill / driver.    I was up at home depot,  and they have a lith ion 1/4 inch ratchet.    Im thinking about adding that to my tool bag.    I also have a Craftsman Sawzall,   a Craftsman 14.4 full size drill and a cordless dremel.   
Commercial Laundry repair Tech and Installer  1973 to 1980
Service Manager / Technician Commercial Laundry repair company 1980 to 2002
Refrigeration - HVAC - Boiler School 1974-1976
Electronic School 1978-1979
Self Employed Appliance Repair Company 2002 to present

Offline ElectronGuru

  • VIP Member
  • Member Since: Sep 2013
  • Posts: 4
Re: cordless tools
« Reply #12 on: September 05, 2013, 07:24:48 PM »
Can't find the specs, but the new bending dewalt looks pretty good:

http://www.dewalt.com/8vmax-gyroscopic-technology-screwdriver
« Last Edit: September 05, 2013, 07:29:59 PM by ElectronGuru »

 

CORDLESS TOOLS

Started by chic

Replies: 19
Views: 6194
Last post October 11, 2013, 09:12:26 AM
by nolazach
Couple of old tools

Started by AJ

Replies: 0
Views: 2799
Last post May 25, 2008, 07:08:18 PM
by AJ
Appliance Repair Tools

Started by AJ

Replies: 0
Views: 31342
Last post July 25, 2008, 12:07:05 PM
by AJ
tools

Started by diyguy

Replies: 3
Views: 2992
Last post January 21, 2009, 07:31:36 AM
by Mr. Fix-It
Craftsman tools?

Started by cal

Replies: 15
Views: 6538
Last post September 20, 2013, 09:58:38 PM
by Wedgeman55
TOOLS

Started by MajorApp

Replies: 7
Views: 2799
Last post January 24, 2013, 09:17:17 PM
by Wedgeman55