wiring diagram

[brad]

I have a Kenmore dryer model no.110.66962501 that I need a wiring diagram for.Some one has changed the wiring around.It was working,but it has stopped working.Won't do nothing.I checked the power to the dryer and it is ok.Can you supply a wiring diagram for this thing?

[AJ]

I have attached the wiring diagram.

[brad]

Thanks for the wiring diagram.

[brad]

After looking at the wiring diagram,I discovered that someone had removed the wires from the thermal cut off   on the heater canister and crimped them together ( Red/white to black wire) and had been running the dryer like this.Also I discovered that where the power cord goes to the termal board on the back of the dryer the middle wire,ground wire, has burned off and the power termal is burned.And the thermal fuse going to the motor is open.What do you guys think?Should I try to fix this thing,or could something else be wrong here?

[AJ]

And the thermal fuse going to the motor is open.

This one?

Thermal Fuse Part # 3392519


Sounds like these are the other parts you are talking about.


Terminal Block Part # 279320


Thermal Cut Out Fuse Kit Part # 279769


If that is all you need I would go ahead and fix it.

[brad]

OK thanks for the info and help.Yes those are the fuses that I'm talking about

[jumptrout51]

Totally clean the dryer venting inside the dryer as well as the connecting vents to the outside before repairing and running this dryer.
Poor airflow probably caused these problems.

[scrapiron]

In addition to Jumptrout's recommendations, I would add one more. Check the heating element for a short to the heater box.

[AJ]

Good advice guys. 

[brad]

Thank you for the advice,I shall do as yo suggest.