Author Topic: Sam Sung frontload washer model P801, E6 shows and stop spinning  (Read 1192 times)

Offline shillion

  • Technician
  • Member Since: Jan 2011
  • Posts: 48
  • Country: ca
  • I have been repairing appliances since 1983
My customer's Sam Sung 24"frontload washer drains all the water,spins may be 10 seconds,Fault E6 shows on display,stops completely, no more action.The user's manual does not show E6(it has E9),what is yhe problem?Please help! :embarassed:



Offline jaytee

  • VIP Member
  • Member Since: Apr 2012
  • Posts: 2
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #1 on: May 06, 2012, 01:36:19 PM »
heater failure.

Offline Specialist

  • Technician
  • Member Since: May 2012
  • Posts: 132
  • Country: gb
  • Electrical Appliance / Catering Equipment Engineer
    • Buy me a beer through paypal
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #2 on: May 08, 2012, 10:45:42 AM »
Hi: The E6 error code relates to a faulty wash heater, but before replacing the Heater be sure to check it's wiring for continuity & also the terminals for good connection. The Element is easy enough to check with a small Multimeter, but remember to disconnect all power from the machine first.
Let Us Fix It Properly.

Offline shillion

  • Technician
  • Member Since: Jan 2011
  • Posts: 48
  • Country: ca
  • I have been repairing appliances since 1983
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #3 on: May 12, 2012, 04:50:53 AM »
Hello Jaytee & Specialist,thanks for the info about the Samsung washer.Since I am not a Samsung repair man,info is hard to find.A local Samsung man told me to replace the control board because there is no heater in this washer.I just did it today and will post the results after a few days to let the customer use it.Thanks again.You guys are very helpful and great! :)

Offline Specialist

  • Technician
  • Member Since: May 2012
  • Posts: 132
  • Country: gb
  • Electrical Appliance / Catering Equipment Engineer
    • Buy me a beer through paypal
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #4 on: May 12, 2012, 10:21:33 AM »
Hi: Just looked at the P801 service manual & it shows that there is a Wash Heater in the bottom of the tub & that both E5/6 errors are related to incorrect water heating.
Please let us know what happens.



Andy
« Last Edit: May 12, 2012, 10:23:07 AM by Specialist »
Let Us Fix It Properly.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 7785
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #5 on: May 13, 2012, 06:48:42 AM »
Here is the service manual Andy is talking about.

Samsung Washer p801 p1001 p1201 p1401 Service Manual


Thanks for sending us a copy of the service manual Andy.  O0

Offline shillion

  • Technician
  • Member Since: Jan 2011
  • Posts: 48
  • Country: ca
  • I have been repairing appliances since 1983
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #6 on: May 18, 2012, 04:32:24 AM »
This is Shillion again.Thank you AJ & Specialist for giving me the info and the service manual.The P801 clearly has a heater.My local Samsung man said there was no heater in the washer.I took his word and replaced the PCB without further diagnosing.I will talk to the machine owner to find out whether I did the correct thing.It's very difficult to repair this machine without first getting the service manual.Now I am well equipped to deal with this machine.I will post the result after I confirmed the machine is good.Thanks again! ;)

Offline Specialist

  • Technician
  • Member Since: May 2012
  • Posts: 132
  • Country: gb
  • Electrical Appliance / Catering Equipment Engineer
    • Buy me a beer through paypal
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #7 on: May 19, 2012, 09:14:34 AM »
Hi Shillion: Your more than welcome, that's what we're here for. Would be great if you let us know what happens & if you need anything else just let us know.



Andy
Let Us Fix It Properly.

Offline shillion

  • Technician
  • Member Since: Jan 2011
  • Posts: 48
  • Country: ca
  • I have been repairing appliances since 1983
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #8 on: May 25, 2012, 11:40:25 PM »
Hello AJ,Andy,Jaytee,this is Shillion again.Since I replaced the electronic control,must be 2 weeks ago,there has been no complaint from the owner of the Samsung washer.That's good news.I learned a lot about this model now.I will post again if there's any more problem.You guys are great!I shall be learning a lot more from this forum.It's better than going back to school. O0

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 7785
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #9 on: May 25, 2012, 11:51:01 PM »
That's great!


Thanks for the update.  O0

Offline Specialist

  • Technician
  • Member Since: May 2012
  • Posts: 132
  • Country: gb
  • Electrical Appliance / Catering Equipment Engineer
    • Buy me a beer through paypal
Re: Sam Sung frontload washer model P801, E6 shows and stop spinning
« Reply #10 on: May 27, 2012, 11:57:19 AM »
Excellent, glad to see you got it sorted.


Andy

Let Us Fix It Properly.

 

Kenmore HE Topload Washer Out of Balance (Display shows UE) Model 796.29002000

Started by rockinrobin

Replies: 49
Views: 1239
Last post March 11, 2013, 09:24:03 PM
by domain
Maytag Washer Model mav7600aww, noisy

Started by dex

Replies: 1
Views: 3022
Last post October 31, 2007, 05:50:56 PM
by rickgburton
Replacing Front Load Washer Pump Model#LHW0050PQ

Started by resapp

Replies: 4
Views: 788
Last post May 22, 2012, 12:34:13 PM
by AJ
whirlpool washer model LXR9245EQ1- won't drain-slow spin

Started by fixmeplz

Replies: 2
Views: 4023
Last post January 16, 2008, 10:13:02 PM
by JWWebster
Amana Washer - Won't stop filling with water.

Started by AJ

Replies: 0
Views: 2251
Last post January 03, 2008, 08:46:14 PM
by AJ
Kenmore Washer Not Spinning Properly

Started by TechnicianBrian

Replies: 0
Views: 2043
Last post April 23, 2008, 10:10:20 PM
by TechnicianBrian