Author Topic: maytag washer a9400 not doing nothing  (Read 2309 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: maytag washer a9400 not doing nothing
« Reply #15 on: May 02, 2012, 10:23:34 PM »
For stocking parts maybe a set of belts, but other then that I would just wait and order what you need when you need it.
These washers are really well built and you may not ever need any other parts.

As for were to order parts, check out this link.

http://appliancejunk.com/forums/index.php?topic=4745.0
Hope you find our site helpful.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: maytag washer a9400 not doing nothing
« Reply #16 on: May 04, 2012, 07:20:23 AM »
You were not reading fuse continuity.
You were reading the short circuit to ground that caused the fuse to blow.
Take a Kid fishing.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: maytag washer a9400 not doing nothing
« Reply #17 on: May 04, 2012, 07:25:54 AM »
The reason it is not blowing now is the large fuse you replaced it with.
The fuse should be 1(one) amp.

The over-rated fuse may cause the a hazard.
Take a Kid fishing.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 637
  • Country: us
Re: maytag washer a9400 not doing nothing
« Reply #18 on: May 04, 2012, 10:02:10 AM »
I don't believe Maytag ever sold the fuse as a separate part. If the fuse blew they wanted you to replace the switch assembly
because one of the switches had failed.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: maytag washer a9400 not doing nothing
« Reply #19 on: May 04, 2012, 11:34:43 AM »
If that fuse is blown she won't fill. If the small white switch is blown she will fill but not wash. If the large switch is blown the washer won't spin. I used to sell .03 amp barrel fuses for a buck a piece when I had my appliance parts store.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 637
  • Country: us
Re: maytag washer a9400 not doing nothing
« Reply #20 on: May 04, 2012, 12:44:28 PM »
I always figured from as a servicer, replace the assembly to avoid a call back.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: maytag washer a9400 not doing nothing
« Reply #21 on: May 04, 2012, 12:53:54 PM »

I always figured from as a servicer, replace the assembly to avoid a call back.


 O0


You have to sell a lot of fuses to make up for one call back. ;)
Hope you find our site helpful.

 

Maytag Neptune washer MAH4000AWW

Started by Sue

Replies: 8
Views: 8077
Last post February 09, 2013, 07:41:01 AM
by def
Video: Old Maytag Gas Washer

Started by AJ

Replies: 2
Views: 3784
Last post September 04, 2007, 10:34:57 PM
by AJ
Maytag Washer Bearing Repalcement MLG2000AWW

Started by davidpgh1

Replies: 8
Views: 10064
Last post January 06, 2008, 01:59:10 PM
by inot66
Maytag LAT8704AAE Washer Leak

Started by endresrk

Replies: 3
Views: 5475
Last post August 28, 2007, 08:11:12 PM
by AJ
How to replace a Maytag - Amana washer water pump and belt.

Started by AJ

Replies: 18
Views: 29214
Last post April 19, 2010, 08:23:29 PM
by JWWebster
How old is my Maytag washer?

Started by jon

Replies: 1
Views: 17837
Last post September 03, 2007, 12:42:08 PM
by AJ